Jump to content


Need help - strange RAM problem


  • Please log in to reply
7 replies to this topic

#1 necrocowboy

necrocowboy

    I hate celery !!

  • New Members
  • PipPip
  • 22 posts
  • Location:Ass end of nowhere, UK
  • Interests:Cycling, cooking & flogging dead horses.
  • Country:UK

Posted 18 April 2007 - 12:51 PM

Hi all - rig in not sig rig but has the following;

MSI K9N Neo (Nvidia 550 MCP)
AM2 X2 4600+
2x1Gb OCZ Platinum PC2 DDR2 6400 (part no OCZ2P8002GK)
BFG 7950GT

So according to the manual & support forums, you install DIMMS in Sockets 1&2 (even though 1&3 / 2&4 are the same colour). When installed, everything looks OK but system is giving BSOD from time to time. The rig's owner is on holiday for 2 weeks so I get a chance to play - I've tested several combinations as outlined below (D=Dimm, S=Slot) with ISO built MemTest86 V3.3.

D1S1 D2S2 - fails after 1 hr @ 400Mb marker
D2S1 D1S2 - fails after 1 hr @ 1118Mb marker

D1S1 - no fail after 8 hr
D2S1 - no fail after 8 hr

So, it is normal that a 'suspect' DIMM can pass Memtest when tested on it's own but fails when done as a matched pair ?

I'm going to RMA the RAM but just want to be 100% that (a) I've tried everything and (b) haven't done something silly.

Regards

NC

#2 VROSA

VROSA

    Ghost Member

  • Global Moderator
  • PipPipPipPipPip
  • 2,043 posts
  • Location:Belo Horizonte - Minas Gerais - Brazil
  • Interests:Hardware, Software, Alphas and Betas, OS Mods, Windows 8.1, Windows 10, Linux, Games, Fun, Friends.
  • Country:Brazil

Posted 18 April 2007 - 01:47 PM

I had similar issues in the past... but dont know what causes that

http://www.x64bit.net/site/board/index.php...amp;#entry37493

Very odd <_<

#3 Camaro

Camaro

    Established Member

  • Members
  • PipPipPipPipPip
  • 907 posts
  • Country:USA

Posted 18 April 2007 - 07:40 PM

View Postnecrocowboy, on Apr 18 2007, 07:51 AM, said:

Hi all - rig in not sig rig but has the following;

MSI K9N Neo (Nvidia 550 MCP)
AM2 X2 4600+
2x1Gb OCZ Platinum PC2 DDR2 6400 (part no OCZ2P8002GK)
BFG 7950GT

So according to the manual & support forums, you install DIMMS in Sockets 1&2 (even though 1&3 / 2&4 are the same colour). When installed, everything looks OK but system is giving BSOD from time to time. The rig's owner is on holiday for 2 weeks so I get a chance to play - I've tested several combinations as outlined below (D=Dimm, S=Slot) with ISO built MemTest86 V3.3.

D1S1 D2S2 - fails after 1 hr @ 400Mb marker
D2S1 D1S2 - fails after 1 hr @ 1118Mb marker

D1S1 - no fail after 8 hr
D2S1 - no fail after 8 hr

So, it is normal that a 'suspect' DIMM can pass Memtest when tested on it's own but fails when done as a matched pair ?

I'm going to RMA the RAM but just want to be 100% that (a) I've tried everything and (b) haven't done something silly.

Regards

NC
Well after reading your post I think its your ram, My little brother has a GA-965P-DS3 intel board with E6400 an that same ram an it has been doing something similer.

#4 viper666

viper666

    Advanced Member

  • Members
  • PipPipPip
  • 101 posts
  • Country:USA

Posted 20 April 2007 - 06:40 AM

well since 2 people are having issue with that ram Id look a voltages. Alot of the new DDRII stuff is reqiring more than the original 1.8 we were told it was gonna use.Alot of boards still auto set 1.8 Id check OCZ's forum for that exact ram. 2 stick need more power

just a guess good luck!

#5 Camaro

Camaro

    Established Member

  • Members
  • PipPipPipPipPip
  • 907 posts
  • Country:USA

Posted 20 April 2007 - 07:38 AM

OCZ's says 2.0v or 2.1V I set this to 2.4 which is the limit this board would go an still couldn't stabilize it.

#6 Guest_scaramonga_*

Guest_scaramonga_*
  • Guests

Posted 20 April 2007 - 08:20 AM

Try relaxing the timings back a little.......what do you have them at ATM?? :bluerip:

#7 Camaro

Camaro

    Established Member

  • Members
  • PipPipPipPipPip
  • 907 posts
  • Country:USA

Posted 20 April 2007 - 08:26 AM

Well, SPD says at 533mhz 3-4-4-10 and at 667mhz 4-4-4-12 and at 800mhz 5-5-5-15 I have successfully run them at lower timings an lower speed, however at 667 an faster there is no timings that works. just get memory errors in test 6 of memtest86+ every pass. one pass was only 2 errors but another was 6.

#8 necrocowboy

necrocowboy

    I hate celery !!

  • New Members
  • PipPip
  • 22 posts
  • Location:Ass end of nowhere, UK
  • Interests:Cycling, cooking &amp; flogging dead horses.
  • Country:UK

Posted 20 April 2007 - 09:13 AM

Hi Guys

Thanks for replies - memory was running at stock speed, stock voltage & stock CPU i.e. not a hint of overclocking !

As I was getting strange errors in tests & BSOD, I've RMA'd the RAM as I shouldn't have to start increasing voltage or relaxing timings to get it to work. Weird thing in my tests was that the RAM only failed Memtest when run as dual channel - worked OK single channel, but still failed Prime & SuperPI.

Regards

NC




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users